| Index > teleproject > Routing, sanding and glue the keyboard backing | |
|---|---|
| Author/Date | Routing, sanding and glue the keyboard backing |
| memecode 27/11/2024 9:36pm | Due to the direction of the grain on the keyboard section there would be not enough strength in the keys themselves. As they'd be cut too thin and across the grain. My solution to this is thin the keyboard section right down to 5mm and then create a new section to glue underneath with the grain running perpendicular to the main orientation. Then cut it down to size before cutting it into individual keyboard keys.
|
| Reply | |